General characteristics Commander 60

Construction
Aluminium hull and aluminium / composite superstructure.

Main dimensions
Length overall: 60 metres
Length waterline: 49.7 metres
Beam moulded: 10.9 metres
Beam overall: 11.4 metres
Draft (@ 50% loaded): 2.5 metres
Displacement: 450 metric tons.
Gross Tonnage: >> 500 GT.

Propulsion and performance
Engines: 2 x Caterpillar diesel engines, type 3516C, 2,525 kW – 3,385 bhp @ 1,800 rpm.
Gearbox: 2x ZF or equivalent.
Propulsion system: 2 x five-blade propeller, water lubricated shaft system
Bow thruster: 150 kW
Stabilizer: Active stabilizer system with zero-speed stabilization
Fuel consumption: 602.0 litres /hour.
Cruising speed: ca. 16.0 knots (@ 50% loaded).
Maximum speed: ca. 18.0 knots (@ 50% loaded).
Range (@ 12.0 knots): 3,000 nautical miles (with 15% reserve).
Fuel tanks: 52,000 litres
Fresh water: 10,000 litres
Generators : 2 x Caterpillar C9, 200.0 kW @ 1,500 rpm.
Emergency generator: 1 x Caterpillar C4.4 86.0 kW @ 1,500 rpm.
Main and emergency power system : 230/400 V – 50 Hz – 3 Phase, 24 V – DC
Shore connections: 2 x (150 A) at the stern, 1x (100 kVA A-SAE) volt. / freq. transformer converter and galvanic isolator.
Batteries: 4 x 24V/200 Ah, 1 x 24V/1,200 Ah, 1 x 24V/350 Ah.
Water makers : 2 x Matrix Silver A, 11,356 litres/day
Exterior paint system : Awlgrip above the water line and International Paint below the water line
Interior paint system : Awlgrip in the engine room and International Paint inside tanks and hull

more specifications